Introducing the MEGAMOTO!
; 7V-28V - H-bridge or Dual Half-bridge
; 13A Continuous -
; Current sensor output can be sent to any analog pin
; Up to three units can be stacked on one Uno/Duemilanove
; Independent half-bridges can control brushless/steppers too!
High-Current motor control for Arduino;
NEW! Wasp RC Speed Control
; 6V-28V - 10A / 30A peak!
; Limit switch inputs
; Tiny size 1.85” x 0.65”
Dalf Motion Control System
; Closed-loop control of two motors
; Full PID position/velocity loop
; Trapezoidal path generator
; Windows GUI for all features
; Giant Servo Mode!
; C source for routines provided
; PIC18F6722 CPU
Phone: 253-843-2504 ; firstname.lastname@example.org
STEER WINNING ROBOTS
Perform proportional speed, direction, and steering with only two Radio/Control channels for vehicles using two
separate brush-type electric motors mounted right and left
with our mixing RDFR dual speed control. Used in many
successful competitive robots. Single joystick operation: up
goes straight ahead, down is reverse. Pure right or left twirls
vehicle as motors turn opposite directions. In between stick
positions completely proportional. Plugs in like a servo to
your Futaba, JR, Hitec, or similar radio. Compatible with gyro
steering stabilization. Various volt and amp sizes available.
The RDFR47E 55V 75A per motor unit pictured above.
SERVO 06.2011 35