The instructions will take you through the assembly of the base
(Figure 14), belt guides (Figure 15), platform and power supply
(Figure 16), and uprights (Figure 17).
Next, you will install the Rambo controller board and wire the
motors, homing switches, and heated bed (Figure 18). You will need
to assemble the extruder and install it on the Rostock (Figure 19);
then comes the three carriages. They need to be assembled and
installed as shown in Figure 20.
FIGURE 14.
FIGURE 19.
FIGURE 15.
FIGURE 17.
FIGURE 16.
FIGURE
20.
FIGURE 18.
SERVO 06.2013 71