In Parts 1 and 2 of this series, I showed how I designed my new 12 lb combat robot, and then
revised the design so that it would
meet the weight restrictions.
This time, I had planned to show
you how I modified and assembled
the P60 drive motors and shafts. I
didn't get as much done as I would
have liked, but at least I pressed the
pinion gears onto the motors.
I used a large bench vise
Featured
This Month:
28 BUILD REPORT: Isotelus Rex — Part 3
by Pete Smith
31 CARTOON
32 Don’t Bite Off More Than You Can Chew Part 2: Designing an Asymmetric Weapon
by Andrea Suarez
35 Old School Lathes
by James Baker
37 2014 STEM Tech Olympiad
by Andrea Suarez
38 PRODUCT REVIEW: Making Tracks
by Pete Smith
40 EVENT REPORT: Thunderdome
by Andrea Suarez
Is telus Rex
; by Pete Smith
Post comments on this
section and find any associated
files and/or downloads at www.
servomagazine.com/index.php
/magazine/article/march2014
_CombatZone.
28 SERVO 03.2014
Part 3: The Build Begins
FIGURE 13. Pressing on pinion gear.
BUILD REPORT: