SERVO 01.2016 13
3. Wide RPM Motor Range Compatibility
4. New Generation MOSFETs for Increased Efficiency
5. Smooth, Linear Throttle Response
6. Fast Refresh Rate up to 600 Hz
Pricing begins at $14.49
AC Input Balance
Charger/Discharger
Also available from Hitec is their latest battery charger: the new X1 mini. It is an affordable answer for
beginner hobbyists as well as an excellent addition to the
experienced RC enthusiasts’ charger collection. Featuring a
compact design for maximum portability and convenience,
the reliable X1 mini delivers 60 watts of power and capably
charges all battery chemistries, including the new
generation LiHV. Its six amp power supply and user-friendly
software will keep things charged both in the workshop
and on the go. Estimated street price is $44.99.
Features include:
• Compact Size and Stylish Design
• Battery Meter
• Battery Internal Resistance Meter
• PC Communications: USB Port for PC Control and
Firmware Upgrade
• Re-Peak Mode for NiMH/NiCd Batteries
• Charger Protection: Over Temperature, Over Capacity,
and Over Short Circuit Reverse Polarity
Charging Specifications:
• AC Input: 100-240 volts AC
• Total Charge Circuit Power: 60 watts AC Input
• Charge Current Range: 0.1-6.0 amps
• Discharge Current Range: 0.1-2.0 amps
• Discharge Current Power: 10 watts
• Charges NiMH, NiCd, LiPo, LiHV, LiFe, Li-Ion, and
Lead Acid Batteries
• NiCd/NiMH Cell Count: 6-8 Cells
• LiPo/LiHV/Li-Ion/LiFe Cell Count: 2-4 Cells
• Pb Voltage: 6-12 volts
• Net Weight: 0.68 lbs (310g)
• Dimensions: 4. 41 x 4. 17 x 2.05 in (112 x 106 x
52 mm)
For further information, please contact:
IR Dual Mode Proximity and
Toggle Switch for Lighting Control
The J2 LED Lighting, LLC AIR2 is a dual mode touchless witch for low voltage LED lighting control. The modes
of operation are door proximity and hand wave toggle,
both providing on/off control. The AIR2 is software driven,
providing automatic change between mode functions. The
AIR2 is very small, with a body length slightly under 1.80”,
a width under 0.70”, and a thickness less than 0.30”.
The operation of the AIR2 is such that in the door
proximity mode when a surface (the door) is in near
proximity (less than 100 mm/four inches), the switch is off.
When the door surface moves out of range of the AIR2
sensor face, the switch turns on the controlled light. When
www.hitecrcd.comHitec