no surface is in front of the AIR2 sensor face for more than
10 seconds, the software switches to the hand wave toggle
mode. Moving a hand past the sensor face within the sense
range toggles the light off and the switch is latched into
this off position. The AIR2 will stay latched off until the
hand wave in front of the AIR2 sensor face is repeated for
on latching. The AIR2 will revert back to the door proximity
mode when a surface is in front of the sensor face more
than 10 seconds. The AIR2 may be operated as a door
proximity switch or a hand wave toggle switch, depending
on the needs of the application.
The AIR2 has a sleek profile with an extruded
aluminum case with moisture-resistant sealed front and
back covers. The AIR2 operates from 7-24 volts DC. The
maximum current switched at 7-12 volts is 2. 5 amps, while
the maximum current at 24 volts DC is 2.0 amps.
The AIR2 may be operated from a nine volt battery for
portable applications such as theatrical props or scenery. It
is equipped with male and female DC barrel type
connectors of the 5. 5 mm x 2.1 mm size jack and plug. The
cable length is a nominal 18” (460 mm) flexible UL2464
rated black PVC.
Securing the unit for general illumination applications in
cabinet work for either door proximity mode or under a
counter hand wave toggle mode, double-sided tape can be
used on the unit’s flat body shape. For applications in prop
and scenery use, the unit can be temporarily secured with
Gaffer’s tape or hot glue. For general lighting applications,
the AIR2 can be used with a 30 watt 12 volt DC constant
voltage LED driver power supply.
For further information, please contact:
Vector GPS/Magnetometer
Eagle Tree Systems announces their new GPS/Magnetometer V2, for use with their popular
Vector Flight Controller/ OSD.
The GPS/
Magnetometer V2
simultaneously receives
and monitors both GPS
and GLONASS satellites,
in addition to other
improvements, which
can provide the following
• Improved position
accuracy for more
precise hovering and
tracking
• Improved RFI
rejection — especially with noisy video transmitters and
cameras
• Faster fix time
• Up to 24 satellites in view
The GPS/Mag V2 is compatible with all Vector systems,
after a firmware update. Vector software version 11.78 or
higher is required for correct GPS V2 operation.
For further information, please contact:
Handheld SLA Battery Tester Line
B&K Precision announces two new handheld battery capacity analyzers — models 600B and 601B — and
improvements upon its former models 600 and 601 with an
enhanced design. Both
models provide durable
Kelvin clamps and can
measure the capacity of
sealed lead acid (SLA)
batteries with Ah
ranges up to 100 Ah.
These new models offer
affordable solutions to
anyone responsible for
the test and
maintenance of SLA
batteries used in
backup power UPS,
emergency lighting, fire
alarms, security
systems, and many
other electrical systems.
Notable
improvements to the previous models are the 600B and
601B's new rubber keypad and high quality Kelvin clamps
that are attached to the instruments via strain reliefs. The
battery analyzers continue to provide the same easy-to-use
interface as their predecessors and are powered by the
battery under test, eliminating the need for external power
to use the instrument.
Both models support testing of 12V batteries with no-load voltage measurement and reverse polarity indication.
Like the previous models, the 600B can be set to 7, 12, 24,
42, 65, and 100 Ah ranges, while the 601B can test both
6V and 12V batteries at Ah ranges between 5-100 Ah,
settable in 1 Ah steps. Additionally, the 601B provides
loaded voltage and internal resistance measurement
capabilities. B&K Precision's 600B and 601B handheld
battery capacity analyzers are listed at a price of $329 and
$439, respectively.
For further information, please contact:
14 SERVO 01.2016
www.j2ledlighting.com J2 LED Lighting LLC
www.bkprecision.com B&K Precision
www.eagletreesystems.com Eagle Tree Systems