SERVO 03.2016 15
FrontPanelExpress.com
The Easiest Way
to Design Custom
Front Panels &
Enclosures
; ; ; Cost effective prototypes
and production runs with
no setup charges
; ; Powder-coated and
anodized finishes in
various colors
; ; Select from aluminum,
acrylic or provide your
own material
; Standard lead time
in 5 days or express
manufacturing in 3 or
1 days
You design it
to your specifications using
our FREE CAD software,
Front Panel Designer
We machine it
and ship to you a
professionally finished product,
no minimum quantity required
se a
u gi
actuators. PowerProx sensors are
constructed with SICK’s proprietary
VISTAL™“tough as steel” housing for
durability even in the toughest
environmental conditions. The
compact size of PowerProx’s sensor
housing also provides flexibility in
terms of machine design. With four
variants (Distance, Speed, Precision,
and Small), these sensors can be used
in a variety of applications.
For further information and
pricing, please contact:
Enhanced Effects
Light with Candle
Bi-Pin Lamp
J2LED Lighting, LLC announces the availability of their EEL1
socket cable, which is designed
for mounting into High Density
Urethane (HDU) styling and
modeling board. The EEL’s cable
socket fits into a mounting hole
from the material’s front side. The
tapered fit of the socket’s body
locks it into place, and a front
5/8” diameter flange provides an
insertion stop. Lock ribs on the
taper provide for anti-rotation of
the socket in the material.
The EEL1 cable socket light
assembly is optimized for 6 lb density
foam board when an 11 mm (7/16”)
hole is used; it can be mounted into
higher density boards with the hole
size increased slightly to reduce
insertion pressure, or with lower
density foam board reducing the hole
diameter for a tighter grip.
Socket taper dimensions are 12
mm (0.47”) diameter typ. down to
9. 7 mm (0.38”) diameter typ. over a
33 mm length.
For mounting holes in HDU rigid
foam board, make the hole 11 mm-
0.25/+0.50 depending on the density
and grip desired. For harder materials,
a 12 mm (0.47”) hole can be used
with adhesive or resin to retain the
socket. The smaller taper end of the
socket has slots that can be used for
resin back filling for additional
retention in material over 25 mm (1”)
thick. In most applications using HDU
as the mounting material, the press-fit
grip from the socket taper is sufficient
to retain it.
The socket cable has a length of
254 mm ( 10”) typ. with a female DC
barrel connector jack 2.1 mm x 5. 5
mm; jack diameter is 10. 55 mm
(0.415”) typ. The light source is a
Candle Bi-Pin Lamp (CBL1) G4 type,
output 30 lumens typ. 1,450 Kelvin.
At 12 volts DC, 80 mA typ., 1.0 watts
typ. Color coordinates are x = 0.588
/ y = 0.385 ref.
The CBL1 is removable from the
socket for insertion or replacement
with a nominal height of one inch;
the overall cable length from the top
of the lamp to the bottom of the
barrel connector is 279.4 mm ( 11”)
typ. Price is $15.99.
For further information, please
contact:
www.sickusa.comSICK
www.j2ledlighting.com J2 LED Lighting LLC